Skip to main content
Version: 2.9.2

How to Install AirGap

Introduction​

This guide provides instructions to install and set up the AirGap solution. It includes the hardware requirements, system setup, VM deployment, and other necessary configurations for both the Vault and Production systems. Follow the outlined procedures to ensure proper deployment and functionality of the AirGap environment.

Prerequisites​

Vault Cluster Requirements​

  • Dedicated Host for Vault Agent VM: A dedicated host server is required within the Vault environment to deploy the Vault Agent VM.
    • Hardware Recommendations:
      • Dual-socket server with 512 GB RAM.
      • 1G and 10G Ethernet interface options.
      • 2–4 TB local flash storage.
      • Future-proof for additional VMs supporting cybersecurity solutions and Windows desktops.
      • Ensure secure OS desktop for recovery operations and Isilon hardware, firmware, and software upgrades.
    • Time Zone and Time Sync: Ensure that the time zone and time are correctly set, and ensure the host server is time synced with the Vault Agent.
    • VM Time Sync: All VMs need to use the same NTP server, to prevent a time skew that would affect overall functionality.
  • Management and AirGap Replication Pool: The Vault PowerScale system must have a Management pool and an AirGap replication pool within the System zone. Nodes must be shared between the pools, but different network interfaces are required for each pool to ensure isolation.
  • Network Subnet Segregation: Use a segregated subnet for all Vault environment components to ensure network isolation.
  • Network Connectivity for Replication: Establish network connectivity between the replication pool of the Vault PowerScale system and the replication pool of the Source PowerScale system. No password should be required for this communication to ensure successful SyncIQ replication.
  • Firewall and Traffic Control: Install a firewall or use a dedicated switch to restrict traffic between the production and the Vault environment.
  • Dedicated Switch for Vault Agent VM Connectivity: Connect the Vault Agent VM to the Management pool of the Vault PowerScale system using a dedicated switch.

Production/Source Cluster Requirements​

  • AirGap Replication Pool: Create a separate AirGap replication pool on the Source PowerScale system within the System zone.
  • Dedicated Subnet for AirGap Replication: Assign a dedicated subnet specifically for the AirGap replication pool on the Source PowerScale system.
  • Node Availability for High Availability: Use at least two nodes with separate network interfaces for the AirGap replication pool to ensure high availability. Single-node setups are allowed but will introduce a single point of failure for SyncIQ replication.
  • Optional Dedicated Nodes for AirGap Replication: You may deploy dedicated nodes specifically for the AirGap replication pools to enhance system isolation and availability.

Hardware Setup​

Create Eyeglass Users and Update Sudoer Files​

First, you must create the Eyeglass Users and update the Sudoer files on both the Vault and the Production Clusters in order to continue.

It is assumed here that the Service Account for the Production Cluster was created during the Eyeglass VM Installation.

To create the Eyeglass users on the Vault Cluster, SSH into its Eyeglass VM using a Terminal, and use the following string of commands:

    isi auth roles create --name EyeglassAdmin --description "EyeglassAdmin role Vault"
    isi auth users create eyeglass --enabled yes --password YourPassword 
    isi auth users modify eyeglass --password-expires no
    isi auth roles modify EyeglassAdmin --add-user eyeglass
    isi auth roles modify EyeglassAdmin --add-priv-ro ISI_PRIV_LOGIN_PAPI
    isi auth roles modify EyeglassAdmin --add-priv-ro ISI_PRIV_DEVICES
    isi auth roles modify EyeglassAdmin --add-priv-ro ISI_PRIV_NS_IFS_ACCESS
    isi auth roles modify EyeglassAdmin --add-priv ISI_PRIV_JOB_ENGINE
    isi auth roles modify EyeglassAdmin --add-priv ISI_PRIV_NETWORK
    isi auth roles modify EyeglassAdmin --add-priv-ro ISI_PRIV_LOGIN_SSH
    isi auth roles modify EyeglassAdmin --add-priv ISI_PRIV_SYNCIQ
    isi auth roles modify EyeglassAdmin --add-priv-ro ISI_PRIV_EVENT
    isi auth roles modify EyeglassAdmin --add-priv-ro ISI_PRIV_STATISTICS

Modify the user account using the following commands:

    isi_visudo
    eyeglass ALL=(ALL) NOPASSWD: /usr/bin/isi_for_array -n ? curl *
    eyeglass ALL=(ALL) NOPASSWD: /usr/bin/isi_for_array -n ?? curl *
    eyeglass ALL=(ALL) NOPASSWD: /usr/bin/isi_for_array -n ? whoami; hostname
    eyeglass ALL=(ALL) NOPASSWD: /usr/bin/isi_for_array -n ?? whoami; hostname

Next, for the Production Cluster, modify the user account using the following string of commands:

  isi_visudo
  eyeglass ALL=(ALL) NOPASSWD: /usr/bin/isi_classic auth ads*
  eyeglass ALL=(ALL) NOPASSWD: /usr/bin/isi_classic domain info*
  eyeglass ALL=(ALL) NOPASSWD: /usr/bin/isi_for_array -n ? curl *
  eyeglass ALL=(ALL) NOPASSWD: /usr/bin/isi_for_array -n ?? curl *
  eyeglass ALL=(ALL) NOPASSWD: /usr/bin/isi_for_array -n ? whoami; hostname
  eyeglass ALL=(ALL) NOPASSWD: /usr/bin/isi_for_array -n ?? whoami; hostname
  eyeglass ALL=(ALL) NOPASSWD: /usr/bin/isi_for_array -n ? ping *
  eyeglass ALL=(ALL) NOPASSWD: /usr/bin/isi_for_array -n ?? ping *

Create Passwordless SSH Tunnel​

  1. SSH into the Production Cluster as the eyeglass user.

  2. Run the following command:

    mkdir .ssh

  3. SSH into to the Vault Cluster as the eyeglass Vault user.

  4. Create an SSH Key Pair by running the following command:

    ssh-keygen -t rsa

  5. After entering the previous command, hit Enter for the default path, and hit Enter again to leave the passphrase blank. An SSH Key Pair should now be created in /ifs/home/eyeglassvault/.ssh

  6. Copy the public key (id_rsa.pub) to the Production Cluster (which will be used for Eyeglass communications) using the following command and replacing the x.x.x.x with the IP of the Production Cluster.

      scp /ifs/home/eyeglass/.ssh/id_rsa.pub 
      eyeglass@x.x.x.x:/ifs/home/eyeglass/.ssh/id_rsa.pub

  7. Complete Production Cluster keyless SSH configuration by logging into it through SSH as the eyeglass user, and running the following commands:

    cd .ssh
    cat id_rsa.pub >> authorized_keys
    chmod 600 authorized_keys

  8. Test the Keyless SSH. To do so, SSH into the Vault Cluster as the eyeglass user, then SSH again, from the Vault Cluster into the Production Cluster. If no password is requested, the operation was successful.

Environment Setup​

Add Airgap Licenses to Eyeglass​

After your AirGap Licenses have been generated with the help of the Superna team, add them into Eyeglass using the License Manager.

  1. Open License Management.
  2. Go to the Manage Licenses tab.
  3. Click on Browse to select the License files from your local machine.
  4. Click on Upload, and accept the Eyeglass EULA.

Retrieve API Token from Eyeglass​

Next, you'll need an API token, used later in the installation process to link the Vault Agent VM to the Eyeglass VM. To get one:

  1. Go to Eyeglass Main Menu (on the bottom left of the Eyeglass Web UI).
  2. Click on Integrations.
  3. Go to the API Tokens tab.
  4. Click on Create New Token.
  5. Enter a relevant name and click on OK.

Add Production Cluster to Eyeglass​

Add the Production Cluster to Eyeglass. When prompted, use the username you created earlier for this Cluster. On the Eyeglass Web UI:

  1. Click on Eyeglass Main Menu (bottom left corner).
  2. Click on Add Managed Device.
  3. Complete the form with the appropriate data. During this step you will be asked for the username and password.
  4. Click on Submit.

Deploy and Configure Vault Agent​

Deploy the Vault Agent​

  1. Deploy a dedicated Vault Agent OVF, which you may later upgrade to the latest build. Contact Support if you haven't obtained the download link for the OVF.

  2. Cluster Up Vault Agent, check that the required services are running, and then Cluster Down.

  3. Upgrade Vault Agent to the desired build, you may use any ECA offline installer for this. If you need help finding one, contact Support.

Edit Vault Agent Config File​

  1. SSH into the Vault Agent VM.

  2. Open the eca-env-common configuration file using the following command or your preferred editor:

    vi /opt/superna/eca/eca-env-common.conf

  3. Edit the file in the following ways:

    - export EYEGLASS_LOCATION=*Your Eyeglass IP*
    - export EYEGLASS_API_TOKEN=*API Token generated above*
    - export RSW_ONLY_CFG=*true* **(this value should be true)**
    - export STOP_ON_AUTOMOUNT_FAIL=*false* **(this value should be false)**

Post-Deployment Verification Steps​

  1. Run Cluster Up.

  2. Check with the docker ps or ecactl cluster status commands that all of the required containers are up and running. The results should look something like this:

    ecaadmin@vltabc-1:~> ecactl cluster status
    Checking service status on all cluster nodes.
    Connecting to 172.25.11.89...
    NAMES         IMAGE                          " " SIZE                      STATUS
    ecssync       eca/ecssync:2.5.8.2-22138      " " 90.1kB (virtual 937MB)    Up 21 hours
    vaultagent    eca/vaultagent:2.5.8.2-22138   " " 32.8kB (virtual 536MB)    Up 21 hours
    taskmaster    eca/taskmaster:2.5.8.2-22138   " " 32.8kB (virtual 508MB)    Up 21 hours
    zookeeper     eca/zookeeper:2.5.8.2-22138    " " 35.8kB (virtual 468MB)    Up 21 hours
    mariadb       eca/mariadb:2.5.8.2-22138      " " 2B (virtual 414MB)        Up 21 hours
    dns           eca/dnsmasq:2.5.8.2-22138      " " 139B (virtual 261MB)      Up 21 hours
    Connection to 172.25.11.89 closed.
    ecaadmin@vltabc-1:~>

Add Clusters to the Vault Agent​

Run the following commands, making sure to replace the X.X.X.X with the appropriate IP address corresponding to the selected Cluster.

  1. Add the Vault Cluster using the following command (this command will prompt for Eyeglass password):

    ecactl isilons add --vaulthost X.X.X.X --user eyeglass --vaultPoolName (Vault_Cluster_Pool_Name) --vaultsynciqexternalInterface (network_interface)

  2. Then, add the Protected Cluster. This, again, will prompt for the Eyeglass user password:

    ecactl isilons add --protectedhost X.X.X.X --user eyeglass

  3. You may also add the Protected Management Node (optional, but recommended). To do this, use the following command (Where X.X.X.X is the IP of the protected Cluster, and Node X is the node from which the source Cluster can reach the Core Eyeglass VM):

    ecactl isilons add --protectedhost X.X.X.X --user eyeglass --protectedManagementNode X

  4. Finally, run the Connectivity Check Command:

    ecactl airgap check --prod isi-prod

Next Steps​

AirGap Policy Configuration​

Create and schedule as many AirGap policies as needed for the environment and use case. See the AirGap Jobs document for more information.

Operational Procedures​

For information regarding common AirGap procedures, see the Common Operations document.